SOI Subzero Special Edition Brushed Shorty Competion Mod 24 Set White/Black

Special Edition SOI Mech Mod & RDA Set

Product code: SOISE24-W
Availability: Not In Stock

Availability: Out of stock

Notify me when this product is in stock:
Out of stock

SOI Subzero Special Edition Brushed Shorty Competion Mod 24 Set White/Black

Special Edition SOI Mech Mod & RDA Set


Brush up your Mech Mod game with this Special Edition Mech Mod & RDA set from Sub Ohm Innovations!

The White/Black Special Edition Shorty Comp Mechanical Mod & Subzero Hybrid 24 RDA set is now at VE!

Using a skilled technique to create a brushed finish, this White/Black Special Edition mod and dripper set will look super stylish in any vapers collection.

The Sub Ohm Innovations Competition Shorty Sub Zero Mech Mod is a 24mm diameter, high-performance competition mechanical mod with an innovative switch design. The intricate switch mechanism is like no other on the market. When the firing button is engaged, a low resistance connection plate is split into 4 symmetrical quarter segments is pushed apart by a pin directly connected to the battery. As the 4 segments separate they make contact with the inner surface of the thick-walled C145 copper tube and complete the circuit between the battery and the installed coils. This results in an eight-point contact between battery and mod that increases efficiency, minimises voltage drop and gives this mod its competition level of performance.

Please note that this product requires a battery to operate. Batteries are sold separately. We recommend a battery amp rating of at least 25A. In particular we recommend SONY VTC4 or SONY VTC5a (Coming Soon to VE) batteries.

Check out this review by Northern Fog including the SOI Subzero 24mm RDA which pairs perfectly with the Shorty Comp Mech Mod!

Subzero Shorty Comp Mech Mod Features...

  • 24mm diameter
  • Sub Ohm Innovations Authentic
  • 8-point clutch contact
  • Excellent venting potential for your own safety
  • Low voltage drop
  • Signature short throw switch
  • C145 copper construction
  • Leak resistant design
  • Battery: positive down

The new Subzero Hybrid RDA by Sub Ohm Innovations is a 24mm dripper that has been upgraded from it's successful 22mm baby brother.

The larger build deck will let you experiment with those bigger more eccentric coil builds and this RDA fits perfectly with the Subzero Shorty Mech Mod as well as the Legendary original. Just remove the top cap!

Featuring 2.5mm sized post holes and a no spin design to make assembling those coil builds an easier process. Want to go hybrid? The Subzero 24 includes a copper-hybrid pin that is reverse threaded. To find out more about the Hybrid connection please check out this video review by Northern Fog.

The top cap features adjustable airflow and also creates a lock on your juice, so if you need to store your vape kit on the move just close the airflow holes fully and you should not experience any leakage issues.

SOI have included a Delrin 510 drip tip connector for you to put your drip tip of choice or use the wide bore chuff cap that's pre-installed.

Subzero 24mm RDA Features...

  • 24mm diameter
  • Sub Ohm Innovations Authentic
  • Delrin Wide Bore Chuff Cap
  • 510 drip tip connector
  • Adjustable AFC
  • Various colour finishes
  • Large build deck
  • Hybrid compatiable
  • 2.5mm post holes & 2-post no spin design
  • Peek insulator


Please use Battery sleeves or cases for transporting and storing these batteries. Never carry a naked battery in your bag or pocket, especially if it can come in contact with metal objects!

  • -Do not charge over 4.2V!
  • -Do not change polarity!
  • -Do not heat the battery, or store under the influence of high temperatures!
  • -Do not short circuit
  • -Make sure they do not come in contact with water!
  • - For longer storage periods should be stored below 45 ° C temperature.
  • - After long storage times need the cell probably make a few charge cycles to increase capacity again.
  • -Do not discharge below 3V.

Mechanical mods have no short circuit protection and therefore require knowledge of Battery safety and Ohm's law to operate safely. We recommend using an ohm meter reader in order to make sure that the coil is at a safe vaping resistance level.

DO NOT USE Tanks on Mechanical mods.

Vape Emporium will not be held liable for any misfortune or harm caused by the use or misuse of this device.

Always use an ohm reader when checking the resistance of your coils for mech. Do not use a regulated mod as it will not give you an accurate reading due to the internal resistance of the mod.

Since the SOI RDA turns the mod into a hybrid by using the copper pin, to check for resistance, please attach the 510 connector included. Please note that the resistance while using the 510 connector is ~0.2 higher than the actual resistance.

1 1 star
2 2 star
3 3 star
4 4 star
5 5 star

Love this product? Why not write a review!